Mansour Painting provides professional wood replacement services for homeowners across Clarkston and nearby Michigan towns. We repair and replace rotten siding, trim, fascia, soffits, and other damaged exterior wood before rot reaches the structure behind it.
Most wood damage is a straightforward fix when handled early. Once it works into surrounding boards and framing, the repair gets bigger and costlier. The first step is knowing which one you have, and a free inspection tells you that.
Rot usually starts where nobody can see it, behind a coat of paint or down in a seam that has opened up. Michigan winters do the rest. Water soaks into the end grain and freezes there, and that pressure works the wood fibers apart from the inside.
Paint won’t fix any of that. Laid over soft wood, a fresh coat tends to peel inside a season while the rot underneath keeps going. Proper exterior wood rot repair starts by cutting the bad wood out and protecting whatever replaces it.
5.0
From 40+ ratings
At Mansour Contracting Inc, we bring our heart-led craftsmanship to homes throughout Clarkston and the surrounding communities. Whether you’re replacing worn-out wood, updating flooring, or restoring siding and window frames, our team is ready to serve with purpose and professionalism.
We handle the exterior wood that keeps your home sealed and looking sharp.
We take on rotting siding replacement and moisture-damaged boards, then close the exterior back up. This is core rotten wood replacement for the walls that face the weather.
The fascia and soffit run along your roofline and take a beating from water. Our fascia and soffit repair covers a single rotten fascia board replacement or a full run.
Deteriorating window frames and soft trim let water reach the wall behind them. We handle trim wood rot repair and exterior trim replacement so the wood looks right and works again.
Solid wood is the base for a paint job that lasts. Our carpentry repairs for painting happen first, so you get one crew for wood repair and painting instead of two. See our exterior painting services for the finish work.
Every project follows the same clear path.
We go over the whole home and flag soft spots, peeling paint wood rot, and damage hiding behind good-looking paint.
We cut out the compromised wood and clear the area down to a sound, dry surface.
We install quality replacement material and match your home’s existing profiles. This is professional wood replacement built to blend in.
We prime all six sides of new boards before they go up. Priming new exterior wood this way keeps moisture out and leaves the surface paint-ready.
We review the finished work with you and leave the site clean.
A few signs point to trouble worth checking:
Catch these early. A board or two now costs far less than a full wall later.
Solid exterior wood protects everything behind it:
The cost of home exterior wood repair depends on how far the rot has spread and the type of wood involved. Access and paint prep factor in too. A small fix today runs a fraction of a neglected one later. That is why our local carpentry contractors favor honest, timely exterior carpentry solutions over quick patches.
Soft trim or a rotten board is worth a look before it spreads. Contact Mansour Painting for a free wood inspection and estimate. We will assess the damage, walk through your options, and tell you straight what needs replacing.
Have a deck or fence that needs work? Our staining services protect outdoor wood, and our drywall and plastering crew handles inside repairs. Our reviews page shows what past customers say.
Press on the wood. Soft, spongy spots mean the rot runs deep, and that board needs replacing. Firm wood with only surface damage can often be repaired and sealed. We sort out which is which during your free estimate.
Rot comes from moisture that sits in the wood too long. Cracked caulk, worn paint, and clogged gutters all let water in. Michigan’s freeze-thaw winters make it worse by splitting the wet wood apart.
Yes. Paint will not stick to or protect rotten wood. We replace the damaged boards first, then prime and paint. That order is what makes the finish last.
In most cases, yes. We match the wood type, size, and profile to your existing trim and siding. Once primed and painted, the repair blends in with the surrounding trim and siding.
Absolutely. Rotten fascia board replacement is one of our most common jobs. The fascia sits behind your gutters and takes constant water, so it often fails first. We can swap a single board or a full run.
Keep water off the wood. Fresh caulk, sound paint, and clear gutters go a long way. Priming new boards on every side helps too. We build that protection into every replacement.
Most repairs take one to three days, depending on how much wood needs replacing and the weather. A larger siding or fascia job takes longer. We give you a timeline before we start.